ON THIS WIKI
Automatic Wiremill
| Automatic Wiremill | |
|---|---|
| |
|
| |
| Name | Automatic Wiremill |
| Source Mod | GregTech |
| ID Name | Unknown |
| Type | Block |
| Stackable | Yes (64) |
| Solid | Yes |
| Transparent | No |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Required Tool | Unknown |
The Automatic Wiremill is a block added by GregTech that is used to create Cable of all varieties except for Glass Fibre Cable and Superconductor Wire with greater efficiency than simply placing the ingots in a line in one's crafting grid. The Wiremill works at the cost of EU, requiring either 1 or 2 EU/t to operate depending on the ingot. Thus, a mere two Solar Panels or two Water Mills (operating on internal water supply and not external water blocks) can provide the Automatic Wiremill with constant power.
Like the other "automatic" GregTech machines, it cannot receive power via its front face.
Comparison of Cable Creation[edit]
| Ingot Type | EU/t | Time Taken | EU Consumed | Cables per Ingot | Cables per Ingot (crafting) | Efficiency Increase |
|---|---|---|---|---|---|---|
| Gold Ingot | 1 EU/t | 10 seconds | 200 EU | 6 Gold Cable | 4 Gold Cable | 50% |
| Copper Ingot | 2 EU/t | 5 seconds | 200 EU | 3 Copper Cable | 2 Copper Cable | 50% |
| Refined Iron | 2 EU/t | 10 seconds | 400 EU | 6 HV Cable | 4 HV Cable | 50% |
| Tin Ingot | 1 EU/t | 7.5 seconds | 150 EU | 4 Tin Cable | 3 Tin Cable | 33% |
| Soldering Alloy Ingot | ? EU/t | ? seconds | ? EU | 1 Soldering Tin | N/A | N/A |
Recipe[edit]
In the above recipe, a Machine Frame, an Aluminium Machine Hull, a Bronze Machine Hull or a Sturdy Casing can be substituted for the Machine Block. Likewise, the Electronic Circuits can be replaced with all varieties of Tier 1 Chip.
Discussion
