ON THIS WIKI
Plate Bending Machine
| Plate Bending Machine | |
|---|---|
| |
|
| |
| Name | Plate Bending Machine |
| Source Mod | GregTech |
| ID Name | Unknown |
| Type | Machine |
| Stackable | Yes (64) |
| Solid | Yes |
| Transparent | No |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Required Tool | 
|
The Plate Bending Machine is a machine added by GregTech, and is used to create plates out of ingots. It can also make Railcraft Standard Rails from certain plates. It accepts only Low Voltage EU by default, so if it is supplied more than 32EU/p it will explode, unless Transformer Upgrades are installed.
Like many other GregTech machines it supports automatically outputting EU or processed items out its back if the respective buttons are active in the GUI (lightning blot for power, orange box for items).
The third button controls whether the two input and output slots are combined - if pressed, the first input slot will be processed first and the second one last. The products will land in the first and second output slot respectively. If the button is disabled the second input will be processed first, and the first slot's contents will be moved into the second one, if possible. The outputted items will go into the first slot if possible, otherwise they go into the second one.
Recipe[edit]
Usage[edit]
The following plates may be created using their corresponding ingot:
If Railcraft is installed, Tin, Iron and Steel Plates are changed to the Railcraft ones.
Trivia[edit]
- The block's subtitle is a reference to Futurama.
Discussion
